Free shipping

on all products

Guaranteed next day delivery

Mon-Fri £15

Saramonic SR-AX104 - Two-Channel XLR Audio Adapter with Preamplifiers and Phantom Power for DSLR Cameras & Camcorders

  • 2-channel xlr audio adaptor with pre-amplifiers and phantom power, ideal for use with any dslr camera with a built-in microphone jack.

  • Level meter allows the user to verify the correct input levels in real time, and output signal can be adjusted by the level controls for optimum recording.

  • Headphone jack enables the user to monitor the audio output from the adaptor during recording or from the camera during playback. the agc disable feature reduces noise during quiet moments of recording.

  • Inputs: one 3.5mm (1/8") auxiliary mini-jack input. two balanced xlr inputs. monitor input jacks for connecting the av cable to the camera

  • Output: one stereo 3.5mm (1/8") mini-jack output

SKU: 4897040884723
Sign up for price alert Sign up to get notified when this product is back in stock

Availability: Out of stock




The Saramonic SR-AX104 is a 2-Channel XLR audio adaptor with pre-amplifiers and phantom power, and is ideal for use with any DSLR camera with a built-in microphone jack. A wide variety of audio devices such as professional condenser microphones, wireless microphones, external audio mixers, sound boards etc can be connected to the camera via this adaptor. Technical Information: Inputs: One 3.5mm (1/8) Auxiliary Mini-Jack Input. Two balanced XLR inputs. Monitor input jacks for connecting the AV cable to the camera. Output: One stereo 3.5mm (1/8) Mini-Jack output. Control Knobs: Left and Right Control Knobs adjust the signal of each channel to the optimum recording levels. Volume Control knob adjusts the headphone volume level. Mono / Stereo Switch: Select mono or stereo output mode LINE / MIC / PH Switches: Select LINE, MIC or Phantom levels 12V/48V Switch: Optional 12 or 48 volt phantom power for condenser microphones that require phantom power to operate. Level Meter: Indicates the sound level in dB for each channel LED indicators: The LED signal indicators flash red for overload GND1 / GND2 Ground Switch: Eliminate ground hum and noise for getting the best sound Gain Switch: Selects LO for unity gain or HI for +20dB boost. MONITOR: Headphone jack to monitor the audio from microphones or camera. AGC DSBL: Camera Auto Gain Control will increase the gain to maximum level; the AGC Disable function reduces the hiss when the camera is recording during quiet moments. Operated from one 9V battery (not included) Input Levels: MIC level -3dBu, LINE level +14 dBu Output Level: Nominal MIC levels Frequency Response: 20 Hz to 20 kHz ( +/- 0.5 dB ) THD: Less than 0.01% @ 1kHz, -36 dBu input S/N Ratio: 85dB @ 1 kHz, -30dBu input Gain: LO Gain 0 dB, HI Gain 20 dB Phantom Power: Dual regulated 12 or 48 Volt power supplies. Current to 14 mA (direct short) Level Meter: -18 to +3 dB in 3 dB increments


Additional Info

Additional Info

Condition New


Write Your Own Review

Only registered users can write reviews. Please, log in or register



Use spaces to separate tags. Use single quotes (') for phrases.