Subscribe to our emails
The VEO Optic Guard Collection is made up of a range of wrist straps, neck straps and harnesses for your optics (such as binoculars) or camera that are designed to allow you to choose and set up the best option for your trip in seconds. The VEO Optic Guard H DLX BK is an ultra-comfortable black neoprene harness that allows you to spread the weight of your optic or camera across your shoulders for maximum comfort when used over extended periods. Patented clip lock rapid release system Wide neoprene shoulder harness with non-slip inner lining PU leather finishing Includes four cinch clips to attach to more than one device Weighs just 240g For everyday use, a neck strap is great, but sometimes you need another solution. For longer treks or frequent usage, spreading the weight of your optics, (such as binoculars or monoculars), or your camera across your shoulders with a proper harness can make a huge impact on your comfort and energy levels throughout the day. For shorter trips, a wrist strap is an excellent way to prevent you from dropping your valuable gear.VEO OPTIC GUARD Collection allows you to select and set up the best solution for your day in seconds with Vanguard’s innovative new patented clip lock quick-release system.Designed to fit most optics and cameras with eyelets for 15-20mm straps, simply attach the cinch clips provided to your chosen optic or camera, and slot it into the cinch buckle of the strap of your choice. This will be held securely in use, and to release it, simply press the button and remove it. The straps include:The VEO Optic Guard NS neck strap, available in black (BK), brown (BR) or green (GR). These are neoprene straps with a non-slip inner lining that are great for everyday use, and can be adjusted in length from 84mm to 1090mm for maximum comfort. Each strap includes a choice of black (PU leather) or brown (real leather) finishing, with enhanced stitching for maximum security. Each strap comes with four cinch clips so you can set up more than one device to use the strap with, such as your binoculars and your camera.The VEO Optic Guard WS wrist strap, available in black (BK) or brown (BR). These can be tightened around the wrist to keep them secure. Each strap includes a choice black (PU leather) or brown (real leather) finishing, with enhanced stitching for maximum security. All models are perfect for keeping your optics or camera safely to hand on shorter trips, but for those with a waterproof camera such as an Olympus Tough, the black model allows you to keep your camera to hand when snorkelling or diving (always rinse off and dry the strap thoroughly after use). Each wrist strap comes with two cinch clips.The VEO Optic Guard H is the no frills harness solution, available in black (BK) or brown (BR). Elasticated straps go across each shoulder connecting to a silicone pad (on black harness) or an embossed real leather pad (on the brown harness) which helps spread the weight across the shoulders and back over longer distances. The straps can be tightened for your comfort, and the height of your binoculars (or other device) easily adjusted. Each strap includes a choice black (PU leather) or brown (real leather) finishing, with enhanced stitching for maximum security. Each harness comes with four cinch clips.The VEO Optic Guard H DLX is the harness solution that delivers maximum comfort over extended periods, available in black (BK), brown (BR) or green (GR). Elasticated straps attach to a wide neoprene shoulder system with a non-slip inner lining through a robust metal buckle. The lower elasticated straps can be adjusted for your comfort, while the neoprene shoulder system spreads the weight comfortably across the shoulders and upper back, allowing you to carry your optics or camera for long periods with minimum effort. On the metal buckle there is a third strap that allows you to attach your optics or camera, and this can be adjusted by up to 115mm for the most comfortable position. Also included are two elasticated loops that can be attached to the metal buckles when needed to hold your optics or camera more securely against your chest as you move between locations. Each harness comes with four cinch clips.So if you don’t want to use a neck strap for every trip, but don’t want the kerfuffle that changing a traditional strap entails every time, then check out the VEO Optic Guard Collection and #makeupyourownmind
Hawke Hawke T2 Camera Adaptor
Hawke T2 Camera Adaptor Simply choose the digi-scope adaptor for your spotting scope and select the T2 adaptor relevant to your camera.
Hawke digiscope Adapter 64026 This Digiscoping Adapter from Hawke Optics allows you to capture photos and video with your camera through any of the spotting scopes in the Nature-Trek line. This adapter slides over the eyepiece and is secured in place using two thumb screws. To attach your camera to the adapter, you'll need a T-ring, sold separately, that either matches your DSLR's lens mount or screws onto the filter thread of your point-and-shoot camera. Simply choose the digi-scope adaptor for your spotting scope and select the T2 adaptor relevant to your camera.*Not compatible with with pre 2017 Nature-Trek models.COMPATIBLE WITH56 193Endurance ED Compact13-39x50Endurance ED 13-39x50 Spotting Scope56 194Endurance ED Compact15-45x60147-78ft / 49-26m @ 1000 yds/mEndurance ED 15-45x60 Spotting Scope56 201Endurance ED20-60x68108-60ft / 36-20m @ 1000 yds/mEndurance ED 20-60x68 Spotting Scope56 203Endurance ED25-75x8590-46.5ft / 30-15.5m @ 1000 yds/mEndurance ED 25-75x85 Spotting Scope55 200Nature-Trek16-48x65Single138-73.5ft / 46-24.5m @ 1000 yds/mNature-Trek 16-48x65 Spotting Scope55 201Nature-Trek20-60x80Single108-60ft / 36-20m @ 1000 yds/mNature-Trek 20-60x80 Spotting Scope
Vanguard Vanguard VEO Multi mount MT-12
The Vanguard VEO MT-12 is a horizontal bar that fits onto any tripod to allow you to add an additional kit, or use it as a horizontal arm for those shots where a vertical central column doesn't quite deliver, such as shots of food. With the VEO MT-12 you can mount up to four items such as cameras, spotting scopes, lighting, binoculars, and more, all on one tripod. If you need to add more, and have space, you can purchase an additional VEO+ MA1 Multi-Mount Adaptor to slot on. To get the best result, we would recommend you consider mounting your kit on a tripod head as this allows the maximum control, allowing you to aim your light, microphone or camera at just the right spot. Each end of the arm has a reversible 3/8” thread that can convert to a 1/4” thread, making it easy to attach any head (no heads included) to either end. Perfect for vertical shots. This kit also includes two VEO+ MA1 Multi-Mount Adaptors that slide onto the horizontal bar and a lever lock secures them firmly. To attach or release your head/kit, simply turn the wheel. These feature a 1/4" thread but can be transformed to a 3/8" thread using one of the adaptors provided (though most heads will also include an adaptor). This arm itself attaches to your tripod quickly and easily, whether it's a 3/8" thread or a 1/4" thread (using one of the adaptors provided). The positioning of the horizontal bar can be shifted from left to right with ease, but just remember to ensure the tripod is balanced before you let it go. If you're pushing the bar out further on one side, we recommend that you ensure the extended length is over a leg from maximum stability. To stay safe on the go, you also get a premium carrying case.
Viking Optics Badger Micro Fibre Cleaning Cloth High Quality 24cm x 24cm Brand New UK Stock in original packaging with full GuaranteeThis micro fibre cleaning cloth is approximately 24cm x 24cm making it ideal for use with a wide variety of different devices from camera lenses, Spotting Scopes, and Binoculars to tablets and even monitor screens. New cloth featuring a picture of a Badger in long grass. Ideal for binoculars, scopes, cameras & Glasses
Viking Optics 'Peregrine' Micro Fibre Lens Cloth High Quality 24 x 24cm (UK) NEW Brand New UK Stock in original packaging with full GuaranteeThis micro fibre cleaning cloth is approximately 24cm x 24cm making it ideal for use with a wide variety of different devices from camera lenses, Spotting Scopes, and Binoculars to tablets and even monitor screens. New cloth featuring picture of a Peregrine Falcon in flight. Ideal for binoculars, scopes, cameras & Glasses
Hawke Digiscoping Adaptor 64025 Simply choose the digi-scope adaptor for your spotting scope and select the T2 adaptor relevant to your cameraCOMPATIBLE WITH55 210 Nature-Trek 9-27x56 Spotting Scope Requires a T2 Mount.
Opticron BC-2 Hide Mount with SH-707E Panhead The BC-2 Bench Clamp is a lightweight & rigid bench clamp support for use in hides/blinds and suitable horizontal railings. Featuring a vertical extension pole and 2-way panhead it provides stable pan, tilt and side tilt for telescopes, binoculars, photographic and other imaging equipment. SH-707E panhead with 360° panning and -90° to +65° tilt 22mm dia. 500mm/19.7” centre column Maximum jaw width: 45mm/1.8” Maximum height extended: 485mm/19.1” Minimum height retracted: 120mm/4.7”