Subscribe to our emails
Manfrotto Used Manfrotto 405 Geared Head (SH37316)
Used Manfrotto 405 Geared Head (SH37316) Good condition geared head with some minor marks to the paint here and there. Requires 410 Plate Sold with 6 MONTHS WARRANTY
Used Sirui Leveling Ball Set RX-75B (Boxed SH35963) Mint Supplied as new with instructions and original box
With a maximum load of 10kg this fluid-damped video tilt head has been designed for DSLRs and video cameras. The sophisticated fluid-damped system allows smooth, quiet and above all vibration-free camera use. The friction of the tilt movement can be continuously adjusted. The pan movement can be locked. The head operates exceptionally smoothly and can be precisely adjusted. It is intuitive to operate and direct. The Safety Lock System prevents the release plate from accidentally slipping. Spirit levels are located on the top and bottom for precise alignment. - Sophisticated fluid damping system allows vibration-free use- Safety Lock System - prevents the plate from accidentally slipping- Continuously adjustable friction for tilt- 360° panorama panning- 2 spirit levels- Rubber covered handle - extends from 30cm to 47cm- Sliding release plate (125mm) with 1/4 inch and 3/8 inch thread- Tripod connection: 3/8 inch thread - Tilt: -65° to +90°- Counterweight: 4kg- Quick release plate slide: 125mm- Base plate diameter: 85mm- Handle length: from 30cm to 47cm- Material: Aluminium- Max. load: 10kg- Size LxWxH (with handle): 130 (415) x 171 x 122mm- Weight: 1.7kg Compatibilityfor video tripods with a head surface area of at least 85mm and 3/8 inch connection thread Included1x SIRUI VH-15 fluid damped video tilt head1x SIRUI VP-125X 125mm release plate1x Transport bag*Tripod not included
With a maximum load of 3kg, this fluid-damped video tilt head is designed for DSLR and system cameras and small camcorders. The sophisticated fluid-damped system allows smooth, quiet and above all vibration-free camera use. The friction of the tilt movement can be continuously adjusted. The pan movement can be locked. The head operates exceptionally smoothly and can be precisely adjusted. It is intuitive to operate and direct. The Safety Lock System prevents the release plate from accidentally slipping. Spirit levels are located on the top and bottom for precise alignment. - Sophisticated fluid damping system allows vibration-free use- Safety Lock System - prevents the plate from accidentally slipping- Continuously adjustable friction for tilt- 360° panorama panning- 2 spirit levels- Rubber covered handle (23cm)- Sliding release plate (69mm) with 1/4 inch and 3/8 inch thread- Tripod connection: 3/8 inch thread - Tilt: -60° to +90°- Counterweight: 1kg- Quick release plate slide: 70mm, Arca-Swiss compatible- Base plate diameter: 48mm- Material: Aluminium- Max. load: 3kg- Size LxWxH (with handle): 76 (300) x 120 x 83mm- Weight: 530g Compatibilityfor DSLR and system cameras, small camcordersTripod with 3/8 inch connector thread Included1x SIRUI VA-5 fluid video head1x TY-70A release plate1x Transport bag
Clearance Manfrotto Magnesium Ball Head Q6. MH057M0-Q6 Open box item, item is showing light signs of use, slight damage to box The Manfrotto MH054MO-Q6 Magnesium Ball Head with Q6 Quick Release is a heavy-duty magnesium alloy ball head that weighs just 2.87 lb yet is capable of supporting 33.07 lb. Designed to meet the demands of professional photographers who want maximum control with minimal effort, the head features tension adjustment and 360-degree panning with a separate lock and a lateral tilt range of -100° / +40°
With a maximum capacity of up to 10kg, this designed fluid video head for video cameras and DSLRs. Thanks to the fluid system with the separately adjustable friction for panning and tilting, it allows a soft, quiet and vibration-free camerawork. The safety lock system prevents accidental slipping off the plate. For precise alignment are located above and below per a level bubble, which is lower with a light (battery included) fitted. The counterweight balance (counterbalance) can be set in seven steps from 3-10kg. Security serves the safety lock system and the mounting plate can be taken only to the rear. The mounting plate BP-125 has a rubberized surface of 125x41mm, and has about 1 "x 1/4" and 1 "x 3/8" screws for the mounting of cameras. The BCH-20 is fitted with the 75 mm levelling half ball on tripods with a 75 mm Bowl. The head can be optimally aligned and quickly fix with the 75 mm hemisphere. Features: 3 levels of friction setting for pan, plus 0 position without friction 3 levels of friction adjustment for tilt, plus 0 position without friction Safety Lock System - prevents slippage of the plate 1 bubble top, 1 bubble below (illuminated) 2 rubber swivel arms - extended from 30-47 cm 7 levels of counterweight balance can be set from 3-10kg Tripod mount: 75 mm hemisphere BP 125 movable with the scale on the head plate Head: Orientation: -65 ° to + 90 ° Counterweight balancing (counterbalance): 3-10kg Hemispheres diameter: 75mm Swing-arm length: from 30-47 cm Maximum weight: 10kg Dimensions Lxwxh (with handle): 125 (400) x 188 x 338mm Weight: 3.1 kg Material: Aluminium Plate: 1 x 1/4 and 1 x 3/8 inch thread screws Slide travel: 125 mm Dimensions Lxwxh: 125 x 51 x 12mm Weight: 110g Material: Aluminium Compatibility: for video tripods with a 75 mm Bowl Included 1 x SIRUI BCH-20 fluid bracket 1 x SIRUI BP 125 plate 125 mm 1 x Carrying Case
Top quality monopod or tripod head Superb condition. Supplied boxed Sold with 3 MONTHS GUARANTEE
Designed with modern videographers and filmmakers in mind, SIRUI’s new line of BCH broadcast quality fluid heads are sure to meet even the most demanding expectation. Impressive specifications include maximum payloads between 6 and 18kg. Not only loaded with great features, BCH heads clearly include SIRUI’s reputation legendary engineering and build quality. A beautifully smooth fluid system coupled with separately adjustable friction controls for the pan and tilt movements allows individual, soft, vibration-free camera movements. For precise alignment, both the top of the platform and the base each have a spirit level, with the lower of them illuminated. The counterbalance system is adjustable in multiple stages, helping you achieve the perfect set-up. Listening to customer feedback SIRUI designed the BCH heads with a safety lock system, as well as engineering the mounting plate so that it can only be removed backwards, helping to prevent mid-shoot mistakes when the pressure is on. The mounting plates have rubber contact surfaces to keep your equipment in good shape and feature both 1/4 "and 3/8" thread screws for attaching cameras. BCH-10 is compatible with 75mm bowls. With the permanently installed half-ball (75mm: BCH-10, BCH-20 - 100mm: BCH-30), the head can be optimally aligned and levelled quickly. The pan handle is telescopic, allowing extra leverage for helping to achieve very fine adjustments, while rubber handles ensure a secure even in cold or wet conditions.
SpecificationMaterial: Aluminium360° panorama function in 5° incrementsSafety Lock System - prevents the plate from slippingSliding Stopper stabilises the camera in portrait orientationArca-Swiss compatibleRelease base can be rotated by 90° incrementsPlate with 1/4 inch stainless steel screw - head with 3/8 inch threadMax. load: 25kgHeight: 103mmWeight: 440g The L-20S 2-Way Pan/Tilt Head from Sirui is designed for use on a monopod, although it can be used on a tripod or any other support with a 3/8"-16 threaded stud. The head can hold up to 25kg, allowing it to be used with heavier telephoto lenses. Separate locks control the +/-90° front-to-back tilt and the 360° panning. To quickly attach your camera to the head, an Arca-type compatible quick release plate is included with a safety lock on the clamp to prevent it from accidentally falling out. Bull's eye and tubular bubble levels help ensure straight horizons, while numbered scales aid with repeatable pans and tilts. A case is included to protect the head when it is not in use.
High strength, lightweight 8-layer Carbon Fiber for the curved arm and forged aircraft aluminum for the L-platform. Ideal for nature and sports photography and other shots of moving objects. Makes your camera/lens outfit "weightless" and will smoothly move horizontally 360° and tilt +150° to -60° with a slight touch. Locking 360° rotating base. Height adjustable 90° platform. Converts to a side mount system with included platform. Arca-compatible 120mm Quick Release plate with rubber surface and with 1/4 and 3/8 screw. Size: 260*120*250mm. Weight: 1.4Kg/3.1lb. Load: 25Kg/55.1lb The Sirui PH-30 Gimbal head is a swing head for cameras with telephoto lenses of up to 25 kilograms. The Gimbal design allows you to rotate the lens around the centre of its centre of gravity. This makes it easy to handle long and heavy lenses. Due to the multi-layer carbon fibre and the high-quality aluminium for the L-bracket, the PH-30 weighs only 1.4 kg and is still sturdy enough to carry up to 25 kg of telephoto lenses. Because of the carbon, you have less vibration and influences due to temperature changes. You can easily turn your camera in all directions without having to make an effort. The Sirui's head makes the camera 'weightless' and moves easily 360° horizontally and tilts +150° up to -60°. This is a must-have for example if you want to follow birds with a telephoto lens. Carrying capacity: 25 kg Arca-Swiss compatible quick release plate Tilting from -60 to 150 degrees Panning: 360 degrees In height adjustable platform Carbon fibre for firmness Weight: 1.4 kg Material: 10-layer Carbon Fiber Max. Load: 25kg / 55lbs Product Weight: 1.4Kg / 3.08lbs Accessory Screws: 1/4”, 3/8” Screw Port: 3/8” Size: 120 x 240 x 250mm (WxLxH)
360 ° panorama function and vertical notchAluminium knobs for added durabilityEasy and fast control of all knobsPlate with 1/4″ stainless steel screw – head assembly with 3/8″ threadSafety Lock – prevents slipping of the plateSliding Stopper – stops the camera slipping when in portrait modeSpirit levels – horizontally and vertically Quick release plateThe Sirui K-10II Ball Head are designed and built to the highest standards. The tolerance between the ball and the bearing on SIRUI heads is a max. 0.01 mm. The superior quality is achieved by high-end CNC milling and high quality surface finish. The base can be smoothly rotated by 360 °, thus panoramic shots are a breeze. With the three spirit levels the head can be perfectly aligned. The clamping device is compatible with the Arca-Swiss system, enabling the use of various quick-release plates. The safety lock system prevents accidental slippage of the quick release plate. The precise control of the knobs allows very smooth and effective locking and unlocking of the individual components. The knob for the friction of the ball can be limited in the KII series included is a limit scale for easy reference. – Ball Diameter: 33mm– Weight: 0.39kg– Height: 96mm– Load Capacity: 20kg
SIRUI PH-10 Gimbal Head-Little Body, Heavy Duty 10-Layer High Strength, 0.98KG Light WeightCompared to large gimbal heads for DSLR, the SIRUI PH-10 Gimbal Head with the 10-layer carbon-fibre body reduces its weight down to 0.98kg/2.16lbs, yet it is still strong enough to support a professional photo/video gear even attached with a telephoto lens. Conquer the outdoorThe Gimbal head supports up to a 15kg/33lbs load to perfectly fit with a mirrorless camera and compatible 200mm-600mm telephoto lens for steady and smooth outdoor shoots. Ideal for bird watching, sports photography, telescope and other outdoor scenarios. Ultra-Smooth Steady Head AdjustmentsQuality built with an ergonomically-designed structure, the gimbal head smoothly moves even when attached to a large heavy camera lens and counterbalances your camera and lens as you turn the head. Slide Your SightsEasily attach compatible photo/video equipment to the quick-release plate and slide the platform with precision scale marks up or down to vary shooting height and your sights. Omni-directional CreationWith the 360-degree rotating base and panoramic base, frame your inspiration by panning or tilting the head as desired for fast shot tracking and extension whether in a pleasant or harsh environment. Independent Locking KnobsManually adjust position setting with the four independent locking knobs for track, base, sliding platform and quick release plate control.Specifications:Brand: SIRUIMaterial: 10-layer Carbon FiberMax. Load: 15kg / 33lbsProduct Weight: 0.98Kg / 2.16lbsMax Loading: 15Kg / 33lbsAccessory Screws: 1/4”, 3/8”Screw Port: 3/8”Size: 208 x 172 x 70mm / 8.19 x 6.77 x 2.76 inches (Height x Length x Width)