Product Description
Sirui Monopod P-424FS
The 10 layer carbon fiber structure gives the P-424FS monopod a weight of only 1.2 kg, which is 25% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots.
The monopod features a unique modular design;
Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod.
Quick Release System
The quick release system has a distinct advantage over the locking knob system.
Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way.
Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted into the quick release sleeves within a second.
When inserted, the mounting plate will be locked securely into place.
Quick release mounting screw
Press and hold the button to take out the screw.
Flip the screw upside down to switch between the 1/4" and 3/8" thread.
Quick release tripod base
Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod.
360° Panning
The upper twist collar has a groove-textured surface for quick adjustment while shooting.
Unlock the upper twist collar to get a full 360°panning ability.
Quick Leveling
Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots
36° Tilting
Use the ball locking knob to adjust the friction of the ball.
Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements.
Full-Featured Tripod Foot
The tripod foot is well built with solid aluminum, offering two legpositions at your choice.
Legs can be folded up reversely to fit into your backpack.
Rubber & Spike Foot
The monopod comes with a rubber foot that can be retracted to reveal a spike.
Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod:
Monopod with feet Video recordings where you can move smoothly, but still with stability.
Monopod
Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option
Extension Rod
Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras
Table Tripod
Low-angle shooting, desktop recording, close-up shots, vlog shooting.
Technical specifications
Areas of Usage
Video, Travel, Nature, Mirrorless, DSLR, Compact, Action, 360° VR
Diameter of Leg
36
Head Mount Type
3/8", 1/4"
Leg Lock Type
Flip Lock
Leg Sections
4
Material
Carbon Fiber
No. of Bubble Levels
2
Pan Angle Range
360
Quick Release
Yes
Tilt Angle Range
36
Tripod Feet Features
Spiked, Rubber
Weight
1200
Folded Length
650
Maximum Height
1600
Maximum Leg Height
1490
Maximum Payload (kg)
12
Minimum Height
540
The 10 layer carbon fiber structure gives the P-424FS monopod a weight of only 1.2 kg, which is 25% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots.
The monopod features a unique modular design;
Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod.
Quick Release System
The quick release system has a distinct advantage over the locking knob system.
Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way.
Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted into the quick release sleeves within a second.
When inserted, the mounting plate will be locked securely into place.
Quick release mounting screw
Press and hold the button to take out the screw.
Flip the screw upside down to switch between the 1/4" and 3/8" thread.
Quick release tripod base
Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod.
360° Panning
The upper twist collar has a groove-textured surface for quick adjustment while shooting.
Unlock the upper twist collar to get a full 360°panning ability.
Quick Leveling
Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots
36° Tilting
Use the ball locking knob to adjust the friction of the ball.
Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements.
Full-Featured Tripod Foot
The tripod foot is well built with solid aluminum, offering two legpositions at your choice.
Legs can be folded up reversely to fit into your backpack.
Rubber & Spike Foot
The monopod comes with a rubber foot that can be retracted to reveal a spike.
Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod:
Monopod with feet Video recordings where you can move smoothly, but still with stability.
Monopod
Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option
Extension Rod
Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras
Table Tripod
Low-angle shooting, desktop recording, close-up shots, vlog shooting.
Technical specifications
Areas of Usage
Video, Travel, Nature, Mirrorless, DSLR, Compact, Action, 360° VR
Diameter of Leg
36
Head Mount Type
3/8", 1/4"
Leg Lock Type
Flip Lock
Leg Sections
4
Material
Carbon Fiber
No. of Bubble Levels
2
Pan Angle Range
360
Quick Release
Yes
Tilt Angle Range
36
Tripod Feet Features
Spiked, Rubber
Weight
1200
Folded Length
650
Maximum Height
1600
Maximum Leg Height
1490
Maximum Payload (kg)
12
Minimum Height
540
