Products

4825 products

  • 12 X Polaroid Colour Instant Film For 600 Cameras

    Polaroid 12 X Polaroid Colour Instant Film For 600 Cameras

    19 in stock

    Product Overview • Compatible with Polaroid™ 600-Type Cameras• Also works with i-Type Cameras• 8 exposures per pack• Format: 3.5 x 4.2 in (8.8 x 10.7 cm)• Image area: 3.1 x 3.1 in (7.9 x 7.9 cm)• Finish: Glossy• Development time: 15 minutes• Battery: Built in, long lasting battery to power up the camera and flash Eight instant color photos with white frames. For use in Polaroid 600-type camera s and Impossible I-type camera s. Full development takes about 10-15 minutes. Our latest color film formula produces photos with rich color, well-balanced tones and those soft textures that make analog photography so distinctive. Its iconic white frame is a piece of instant history.

    19 in stock

    £189.00

  • 12 X Polaroid Instant Colour Film For Polaroid i-Type Cameras

    Polaroid 12 X Polaroid Instant Colour Film For Polaroid i-Type Cameras

    7 in stock

    12 Packs of Polaroid i-Type Color  Modern film for modern instant cameras. 8 instant photographs to bring your moment to life in dreamy Polaroid colour and finished in that iconic white frame. This colour i-Type film is compatible with the OneStep 2, OneStep+, the Polaroid Now, and the Polaroid Lab. It's battery-free so it won't work for vintage cameras. 8 Shots. Store chilled, shoot warmTemperature affects how the film works. Keep it stored cold in the fridge, but never freeze it. Ideally, you should let it adjust to room temperature before you use it. That’s around 55–82°F (13–28°C). When it’s cold out, keep your photos warm in a pocket close to your body while they develop. Or if it’s a hot day, make sure they stay cool. Shoot with the lightThe more light in your shot, the better your photo will turn out. Instant film loves light, especially natural light. Use the flash for all your indoor photos. For best results, we also recommend using the flash for outdoor shots, unless it’s a bright sunny day. Develop in the darkAll photos appear blank at first. They’re most sensitive during this time, so don’t bend or shake them. Shield them from the light, and place them face down as they develop. Keep B&W photos shielded from light for about 1 minute, and colour film for about 6 minutes.

    7 in stock

    £179.00

  • 18 in 1 Lens Filter Step Ring Set 9pcs Step Up Rings & Step Down Rings

    k&f concept 18 in 1 Lens Filter Step Ring Set 9pcs Step Up Rings & Step Down Rings

    29 in stock

    Kit Includes: Step Ring 37-49mm 49-52mm 52-55mm 55-58mm 58-62mm 62-67mm 67-72mm 72-77mm 77-82mm 49-37mm 52-49mm 55-52mm 58-55mm 62-58mm 67-62mm 72-67mm 77-72mm 82-77mm * Ultra-low chemical residues, attached to a solid,tight match* Special aviation aluminum alloy, high strength, impact resistance, twist and pressure* Lenses and filters come in different sizes and models, they don't always fit together correctly,but this step up and step down filter will solve this matter* 18pcs Step Up and Step Down Ring Filter Set  

    29 in stock

    £19.99

  • 2 x Fuji Instax Wide Film for Fujifilm 300 210 200 100 Instant Cameras

    Fujifilm 2 x Fuji Instax Wide Film for Fujifilm 300 210 200 100 Instant Cameras

    49 in stock

    The Fujifilm instax Wide Instant Film Twin Pack contains 20 shots of instant colour film that is compatible for use with Fujifilm instax 200 and 210 cameras. This film features beautiful colour reproduction with natural skin tones when used under daylight or electronic flash lighting conditions. Kit includes 2 twin packs of 10 x shots of instax wide colour film. 

    49 in stock

    £38.99

  • 2 X Polaroid Instant film Colour for 600 Cameras

    Polaroid 2 X Polaroid Instant film Colour for 600 Cameras

    16 in stock

    • Compatible with Polaroid™ 600-Type Cameras• Also works with i-Type Cameras• 8 exposures per pack• Format: 3.5 x 4.2 in (8.8 x 10.7 cm)• Image area: 3.1 x 3.1 in (7.9 x 7.9 cm)• Finish: Glossy• Development time: 15 minutes• Battery: Built-in, long-lasting battery to power up the camera and flash Eight instant colour photos with white frames. For use in Polaroid 600-type cameras and Impossible I-type cameras. Full development takes about 10-15 minutes. Our latest colour film formula produces photos with rich colour, well-balanced tones and those soft textures that make analogue photography so distinctive. Its iconic white frame is a piece of instant history.

    16 in stock

    £31.99

  • 2 x Triangular Split Rings (pair) for Camera Straps D-Ring Connectors Canon

    Nikon 2 x Triangular Split Rings (pair) for Camera Straps D-Ring Connectors Canon

    9 in stock

    Pair of split rings for securing camera strap to the camera. Bright chrome finished metal for durability Triangle Chrome camera strap rings to fit strap lugs on a camera, in excellent condition   Material: Metal Overall Size: Approx. 1.3cm x 1.3cm/ 0.51" x 0.51"   Package Included: 2 x Camera Strap Triangle Rings

    9 in stock

    £3.99

  • 2-Power Lithium Ion and NiMH Universal Battery Charger

    2-Power 2-Power Lithium Ion and NiMH Universal Battery Charger

    5 in stock

    Fast, Nitecore Battery Charger, designed to charge lithium ion battery packs that are used in a variety of devices including smartphones and digital cameras. This battery charger has a 1A USB charging port. This handy battery charger can be used to charge 3.6V, 3.7V, 7.2V and 7.4V Lithium Ion battery packs, and can charge NiMH AA & AAA rechargeable batteries

    5 in stock

    £24.99

  • 3 Legged Thing - Punks Billy 2.0 with AirHed Neo 2.0 Black Tripod

    3 Legged Thing 3 Legged Thing - Punks Billy 2.0 with AirHed Neo 2.0 Black Tripod

    2 in stock

    Load Capacity: 40 lb Maximum Height: 65.3" Minimum Height: 7.8" Folded Length: 17.9" Leg Sections: 5 Weight: 3.46 lb Carbon Fiber Construction Ergonomic Twist Lock Joints AirHed Neo 2.0 Ball Head Arca-Type Compatible QR Plate Included The Billy 2.0 Carbon Fiber Tripod with AirHed Neo 2.0 Ball Head from 3 Legged Thing is part of the Punks series of tripods and has now been redesigned with added features for greater versatility. Starting with a robust 40 lb load capacity and an Arca-type AirHed Neo 2.0 ball head, the Billy 2.0 features three removable legs, which can be used as a monopod, as a boom, or a selfie stick when combined with separately available accessories. By adding separately available Vanz tripod feet, the Billy 2.0 can be converted into a tabletop tripod. The Tri-Mount plate has been refined and offers three hollowed spurs for attaching accessories, and a 1/4"-20 threaded mount on the canopy allows an accessory arm or stud to be attached for mounting a monitor, microphone, LED light, or other accessory. Weighted, ergonomic twist-lock joints provide a lower center of gravity for improved stability. The lightweight carbon fiber legs feature independent leg spread and three locking angles, making it easy to level the tripod on uneven terrain. This versatile tripod was built to stand up to everyday use, yet weighs only 3.46 lb and has reverse folding legs that give it a compact folded length of a 17.9", making it easy to store or carry along wherever it may be needed. Three detachable legs convert to monopod, boom, or selfie stick Converts to table-top tripod with the addition of 3LT's Vanz tripod feet (sold separately) Improved engineering and increased stability in leg twist lock joints Weighted leg joints lower the center of gravity for increased stability Removable, reversible center column 3 locking leg positions: 23-, 55-, and 80° Refined Tri-Mount plate offers three hollowed spurs for accessory attachments 1/4"-20 Accessory mount on tripod canopy Arca-type compatible AirHed Neo 2.0 ball head New Chicken Lips anti-rotation shims improve leg strength and stability Removable rubber tripod feet for maximum stability

    2 in stock

    £279.00

  • Sale -17% 3 Legged Thing - Punks Brian 2.0 with AirHed Neo 2.0 Black Tripod

    3 Legged Thing 3 Legged Thing - Punks Brian 2.0 with AirHed Neo 2.0 Black Tripod

    3 in stock

    Load Capacity: 30 lb Maximum Height: 73.2" Minimum Height: 7.4" Folded Length: 16.5" Leg Sections: 5 Weight: 3.7 lb Carbon Fibre Construction Ergonomic Twist Lock Joints AirHed Neo 2.0 Ball Head Arca-Type Compatible QR Plate Included The Brian 2.0 Carbon Fibre Tripod with AirHed Neo 2.0 Ball Head from 3 Legged Thing is part of the Punks series of tripods and has now been redesigned with added features for greater versatility. Starting with a robust 30 lb load capacity and an Arca-type AirHed Neo 2.0 ball head, the Brian 2.0 features three removable legs, which can be used as a monopod, as a boom, or a selfie stick when combined with separately available accessories. By adding separately available Vanz tripod feet, the Brian 2.0 can be converted into a tabletop tripod. The Tri-Mount plate has been refined and offers three hollowed spurs for attaching accessories, and a 1/4"-20 threaded mount on the canopy allows an accessory arm or stud to be attached for mounting a monitor, microphone, LED light, or other accessory. Weighted, ergonomic twist-lock joints provide a lower centre of gravity for improved stability. The lightweight carbon fibre legs feature independent leg spread and three locking angles, making it easy to level the tripod on uneven terrain. This versatile travel tripod is the tallest model in the Punks series, yet weighs only 3.7 lb and has reverse folding legs that give it a compact folded length of a 16.5", making it easy to store or carry along wherever it may be needed. Three detachable legs convert to monopod, boom, or selfie stick Converts to table-top tripod with the addition of 3LT's Vanz tripod feet (sold separately) Improved engineering and increased stability in leg twist lock joints Weighted leg joints lower the centre of gravity for increased stability Removable, reversible centre column 3 locking leg positions: 23-, 55-, and 80° Refined Tri-Mount plate offers three hollowed spurs for accessory attachments 1/4"-20 Accessory mount on tripod canopy Arca-type compatible AirHed Neo 2.0 ball head New Chicken Lips anti-rotation shims improve leg strength and stability Removable rubber tripod feet for maximum stability

    3 in stock

    £299.00£249.00

  • Sale -15%Last stock! 3 Legged Thing - Punks Corey 2.0 with AirHed Neo 2.0 Black Tripod

    3 Legged Thing 3 Legged Thing - Punks Corey 2.0 with AirHed Neo 2.0 Black Tripod

    1 in stock

    Load Capacity: 30 lb Maximum Height: 57.4" Minimum Height: 7.1" Folded Length: 14.2" Leg Sections: 5 Weight: 3.92 lb Magnesium Alloy Construction Ergonomic Twist-Lock Joints AirHed Neo 2.0 Ball Head Arca-Type Compatible QR Plate Included The Corey 2.0 Magnesium Alloy Tripod with AirHed Neo 2.0 Ball Head from 3 Legged Thing is part of the Punks series of tripods, now redesigned with added features for greater versatility. Starting with a robust 30 lb load capacity and an Arca-type AirHed Neo 2.0 ball head, the Corey 2.0 features three removable legs, which can be used as a monopod, as a boom, or a selfie stick when combined with separately available accessories. By adding separately available Vanz tripod feet, the Corey 2.0 can be converted into a tabletop tripod. The Tri-Mount plate has been refined and offers three hollowed spurs for attaching accessories, and a 1/4"-20 threaded mount on the canopy allows an accessory arm or stud to be attached for mounting a monitor, microphone, LED light or other accessory. Weighted, ergonomic twist-lock joints provide a lower center of gravity for improves stability. The lightweight magnesium alloy legs feature independent leg spread and three locking angles, making it easy to level the tripod on uneven terrain. This ultra compact travel tripod weighs only 3.92 lb and has reverse folding legs that allow it to fold to a compact folded length of a 14.2", making it easy to store, fit in a camera bag or backpack, and carry along wherever it may be needed. Three detachable legs convert to monopod, boom, or selfie stick Converts to table-top tripod with the addition of 3LT's Vanz tripod feet (sold separately) Improved engineering and increased stability in leg twist lock joints Weighted leg joints lower the center of gravity for increased stability Removable, reversible center column 3 locking leg positions: 23-, 55-, and 80° Refined Tri-Mount plate offers three hollowed spurs for accessory attachments 1/4"-20 Accessory mount on tripod canopy Arca-type compatible AirHed Neo 2.0 ball head New Chicken Lips anti-rotation shims improve leg strength and stability Removable rubber tripod feet for maximum stability

    1 in stock

    £199.00£169.00

  • Sale -15% 3 Legged Thing - Punks Travis 2.0 with AirHed Neo 2.0 Black Tripod

    3 Legged Thing 3 Legged Thing - Punks Travis 2.0 with AirHed Neo 2.0 Black Tripod

    2 in stock

    Load Capacity: 40 lb Maximum Height: 65.3" Minimum Height: 7.8" Folded Length: 17.9" Leg Sections: 5 Weight: 4.01 lb Magnesium Alloy Construction Ergonomic Twist Lock Joints AirHed Neo 2.0 Ball Head Arca-Type Compatible QR Plate Included The Travis 2.0 Magnesium Alloy Tripod with AirHed Neo 2.0 Ball Head from 3 Legged Thing is part of the Punks series of tripods and has now been redesigned with added features for greater versatility. Starting with a robust 40 lb load capacity and an Arca-type AirHed Neo 2.0 ball head, the Travis 2.0 features three removable legs, which can be used as a monopod, as a boom, or a selfie stick when combined with separately available accessories. By adding separately available Vanz tripod feet, the Travis 2.0 can be converted into a tabletop tripod. The Tri-Mount plate has been refined and offers three hollowed spurs for attaching accessories, and a 1/4"-20 threaded mount on the canopy allows an accessory arm or stud to be attached for mounting a monitor, microphone, LED light, or other accessory. Weighted, ergonomic twist-lock joints provide a lower center of gravity for improved stability. The lightweight magnesium alloy legs feature independent leg spread and three locking angles, making it easy to level the tripod on uneven terrain. This versatile tripod is an ideal support for students and novices, with a generous height of 65.3" and a weight of only 4.01 lb and has reverse folding legs that give it a compact folded length of a 17.9", making it easy to store or carry along wherever it may be needed. Three detachable legs convert to monopod, boom, or selfie stick Converts to table-top tripod with the addition of 3LT's Vanz tripod feet (sold separately) Improved engineering and increased stability in leg twist lock joints Weighted leg joints lower the center of gravity for increased stability Removable, reversible center column 3 locking leg positions: 23-, 55-, and 80° Refined Tri-Mount plate offers three hollowed spurs for accessory attachments 1/4"-20 Accessory mount on tripod canopy Arca-type compatible AirHed Neo 2.0 ball head New Chicken Lips anti-rotation shims improve leg strength and stability Removable rubber tripod feet for maximum stability

    2 in stock

    £199.00£169.00

  • 3 Legged Thing - Trent 2.0 Monopod Blue & Docz2 Foot Stabiliser

    3 Legged Thing 3 Legged Thing - Trent 2.0 Monopod Blue & Docz2 Foot Stabiliser

    5 in stock

    Load Capacity: 66 lb Maximum Height: 81.9" Minimum Height: 26.2" Closed Length: 25.8" Leg Sections: 4 Weight: 2.6 lb Magnesium Alloy Tubes Twist-Lock Joints The blue Trent 2.0 Magnesium Alloy Monopod Kit with DocZ2 Foot Stabilizer from 3-Legged Thing is precision engineered from aircraft-grade magnesium alloy, featuring new refined leg locks that boast improved grip and leverage due to a combination of rubber pads and knurling. Trent 2.0's full extended height reaches 81.9" tall at full extension, making it one of the tallest monopods in the world. Capable of lateral loads as well as vertical, Trent 2.0 makes an awesome boom for cameras or microphones. Precision engineered from aircraft-grade magnesium alloy and supporting weights of almost 50 times his own weight, it offers a 66 lb payload capacity. The included Doc72 Foot Stabilizer is designed to add stability to the Trent 2.0, it allows a smoother pivot when shooting video or tracking a fast-moving subject. It features a foot control that allows the adjustable ball to easily lock into place. This foot stabilizer has an alternate use as a mini or tabletop tripod with rubberized feet that add traction on smooth surfaces or for better grip on uneven ground. Load to weight ratio of 50:1 Improved twist-lock joint grip and leverage 3/8"-16 to 1/4"-20 retractable head mounting screw Detachable rubber foot can be replaced with any 3-Legged Thing foot accessories Can also be used as a microphone or camera boom

    5 in stock

    £119.00

Login

Forgot your password?

Don't have an account yet?
Create account